Title : DIY: Minimalist Copper Clothes Rack
link : DIY: Minimalist Copper Clothes Rack
DIY: Minimalist Copper Clothes Rack
You know that feeling when you're an adrenaline junkie or a regular junkie and you have to keep getting higher and old stuff you tried doesn't have quite the same effect? That's how sustainability is for me. Now it's like, shopping secondhand isn't enough anymore, so I've become a real garbage person lately. It all started when my friend found 250€ of old vinyl and a pair of Ray Ban Clubmasters in an abandoned house and warehouse, respectively. Since then I've been scavenging condemned homes and factories in Cleveland like the featherless buzzard I am. I want much of what I consume- from plywood project boards and hairpin legs to organic produce- to be diverted from landfills (but more on that later). I guess that's the same as secondhand. The only difference now is, I'm tired of spending money on things.
Anyway I've wanted a garment rack for as long as I've had a Pinterest account, but I could never justify getting one because I had closets. Also, I hate everything. Then I found two ten foot copper pipes in the basement of an old building, stamped "Chase Brass & Copper Co.," from the tube mill on E. 260th in Cleveland. The owners wanted to throw them away. Instead I lugged them, alone, to Home Depot (thanks for the help, gentlemen of Tremont) for cutting (it's easy to cut copper, you just twist the clamp thing or use a hacksaw, but I don't have a cutter and didn't want to buy one). Technically Home Depot is supposed to charge $3 and up per cut- this was free. Eventually my goal is to have a complete set of nomadic furniture that transports easily and assembles / disassembles quickly without tools or screws, so I wanted something using minimal material which could be constructed in minutes.
Anyway I've wanted a garment rack for as long as I've had a Pinterest account, but I could never justify getting one because I had closets. Also, I hate everything. Then I found two ten foot copper pipes in the basement of an old building, stamped "Chase Brass & Copper Co.," from the tube mill on E. 260th in Cleveland. The owners wanted to throw them away. Instead I lugged them, alone, to Home Depot (thanks for the help, gentlemen of Tremont) for cutting (it's easy to cut copper, you just twist the clamp thing or use a hacksaw, but I don't have a cutter and didn't want to buy one). Technically Home Depot is supposed to charge $3 and up per cut- this was free. Eventually my goal is to have a complete set of nomadic furniture that transports easily and assembles / disassembles quickly without tools or screws, so I wanted something using minimal material which could be constructed in minutes.
To prevent wasted tubing, I had them cut one 10' pipe in half and the other into two 42" pieces and four 9" pieces. I bought four unpackaged 3/4 inch x 3/4 inch 90 degree elbows, two 3/4 inch pressure tees, and ripped two 3/4 inch tube caps out of my grandmother's old air conditioner. There was gum, grease, and some unidentifiable animal fur stuck to the pipes, which I cleaned with lemon and salt. Just put salt on a lemon slice and rub directly- you could also use vinegar, though it's less acidic and won't clean copper as well. Attach elbows to the top of the 5' foot pieces, connecting them with a 42" pipe. Insert 5' pieces in the tees, then 9" pieces with caps. On the other side of each tee, attach 9" pieces with elbow joints, and connect with the final 42" piece. I was going to make a gif showing how I assembled it but I thought that would be patronizing so I ate a pizza instead.
I've never done a DIY here before because frankly, if I can avoid doing something myself, I will, but this is easier than Legos. The project cost me $8, $10 if you count gas money, lemons and salt (I used the lemon slices for water and tea beforehand, further amortizing my purchase). If you were to buy all new materials, it would cost about $55, more if you wanted 1" pipes. But I see a lot of people throw away copper and other valuable materials like they're nothing. I don't understand why heroin addicts break into cars for spare change or GPS systems when there's so much free copper floating around that can be sold for way more in scrap yards.
I've never done a DIY here before because frankly, if I can avoid doing something myself, I will, but this is easier than Legos. The project cost me $8, $10 if you count gas money, lemons and salt (I used the lemon slices for water and tea beforehand, further amortizing my purchase). If you were to buy all new materials, it would cost about $55, more if you wanted 1" pipes. But I see a lot of people throw away copper and other valuable materials like they're nothing. I don't understand why heroin addicts break into cars for spare change or GPS systems when there's so much free copper floating around that can be sold for way more in scrap yards.
Thus articles DIY: Minimalist Copper Clothes Rack
that is all articles DIY: Minimalist Copper Clothes Rack This time, hopefully can provide benefits to you all. Okay, see you in another article post.
You are now reading the article DIY: Minimalist Copper Clothes Rack the link address https://letsexploretravels.blogspot.com/2017/08/diy-minimalist-copper-clothes-rack.html
Related Posts :
Today in the Wildwoods: Monday, July 3, 2017- Peach Party & Perfect Peace Pie Contest at Downtown Wildwood Farmer's Market on Saturday, July 22nd
- In the Garden . . . Starting with a Rough Schematic
- An Afternoon in San Angel
- Landon McNamara to perform at Eddie's Surf & Supply on Fourth of July; prize raffle after fireworks
0 Response to "DIY: Minimalist Copper Clothes Rack"
Post a Comment